(800) 827-5424

MY ACCOUNT | VIEW CART

Home > Supplies > Xerox Supplies > Xerox WorkCentre Supplies > Xerox WorkCentre 6400 Supplies >

Xerox 108R00866 ADF Roller Kit

Allow 1 Extra Business Day For Processing

Our Price: $101.60
Sale Price: $84.19

Availability: In Stock

Qty:

Details

Replacement Instructions

Xerox WorkCentre 6400 ADF Roller Kit

Genuine OEM ADF Roller Kits designed for the Xerox WorkCentre 6400 series and other equipment models in this product family. Projected yield is 100,000 pages, based on 5% coverage.

Highlights

Condition: New

OEM: Y

Product Type: ADF Roller Kit

Product Code: 108R00866

UPC Code : 095205750928

Compatible Products

Xerox WorkCentre 6400
Xerox WorkCentre 6400/S
Xerox WorkCentre 6400/X
Xerox WorkCentre 6400/XF

More Information

Weight: 1 lbs.

Length: 6.5 in.

Width: 6 in.

Height: 2 in.

Shipping and Tax Information

Sales Tax Charged: Tennessee

Ship to Countries: Worldwide

How To Replace the Automatic Document Feeder (ADF) Roller Kit Solution:

NOTE: The ADF Roller Kit includes the ADF roller assembly, the ADF separator pad, and two secondary ADF pads. Replace the ADF roller assembly

Remove the ADF roller assembly: Raise the ADF Top Cover into the open position.
Raise the ADF Top Cover into the open position
Locate the roller assembly on the bottom side of the top cover.
Locate the lock lever directly to the right of the lower roller in the assembly.
Raise the lock lever upward to unlock the roller assembly
Grasp the top roller, lower the roller down, and remove the roller assembly from the printer.
Remove the roller assembly from the printer
Install the new roller assembly: Remove the new ADF Roller Kit from its packaging. Use the packaging to seal the old assembly for waste disposal. CAUTION: Do not remove the piece of plastic covering the top roller of the assembly. The covering is intended to hold the levers located behind the roller in place during the installation.
Make sure to place the roller assembly in the correct position to prevent misalignment.
Grasp the roller assembly and align the left side of the lower roller with the mounting hole in the ADF and place the assembly into position.
Align the left side of the lower roller with the mounting hole in the ADF and place the assembly into position
Raise the lever located directly above the lock lever (to the right of the assembly). This will allow the roller assembly to be completely placed into operating position.
Press in on the lower roller of the assembly, raise the lock lever up, and then down until the lever clicks into the locked position Remove the plastic covering from the top roller in the assembly by pressing inward, toward the middle of the roller and then pulling the plastic piece away from the roller assembly.
Remove the ADF separator pad and the two secondary pads: Locate the ADF separator pad. The separator pad is located directly on the printer, opposite the roller assembly location when the ADF cover is closed.
Raise the ADF separator pad up into the vertical position and then remove the pad Locate ADF pad 2. This pad is located in the same location as the separator pad. The location of pad 2 is framed by the ADF separator pad, when both are in operating position.
Locate ADF pad 2 Use a coin to lift the bottom edge of pad 2. Use a coin to lift the bottom edge of pad 2 Grasp pad 2, lift and remove the pad from the printer. Grasp pad 2, lift and remove the pad from the printer CAUTION: Make sure to leave the spring, which is located directly beneath pad 2 in position. The pad requires this spring to work correctly.
Locate ADF pad 3. This the rectangular pad located directly next to where pad 2 was removed.
Lift up on the edge of pad 3.
Grasp pad 3, lift and remove the pad from the printer. Locate ADF pad 3 Install the ADF separator pad and the two secondary pads:
Remove the new ADF separator pad and two secondary pads from the packaging. Use the packaging to seal the old pads for waste disposal.
Install pad 3: Line up the short sides of rectangular pad 3 with the location on the printer.
Press down on the sides of the pad until the pad clicks into operating position.
Install pad 2: Grasp pad 2 and position the tab in its location.
Press down on the pad until the pad clicks into operating position.
Install the separator pad: Grasp the pad and hold it vertically until the tabs on the pad line up with the location on the printer, and then lower the pad.
Move the pad down into the horizontal position until it clicks into position. The pad will cover the spring.
Install the separator pad Lower the ADF Top Cover into the closed position.